LOKSET® SPIN TO STALL.
Lokset capsules are filled with a reinforced thixotropic polyester resin in one compartment and a catalysed mastic filler in the other, separated by a physical barrier. The rotation of the bolt during installation ruptures the capsule, shreds the skin and mixes the two components causing a chemical reaction and transforming the resin mastic into a solid anchor.
The capsule is available in 50:50 ratio of fast: slow speeds
Advantages
- FAST SETTING, EASY TO USE
- SHORT INSTALLATION TIME
- QUICK, HIGH LOAD TRANSFER
Features
- Rapid insertion, easy and quick to use
- Shorter installation times with no hold time required
- Easy to install, requiring no specialty injection equipment
- Resistant to anchoring failure caused by blasting or vibration
- Rapid anchoring of the bolt to the surrounding strata
- High load transfers achievable almost immediately
- Full column bonded bolts strongly resist the horizontal and lateral strata movement associated with convergence
- Provides strength and rigidity to prevent sag
- Acts as a reinforcement that clamps the individual strata layers into a single high strength beam
- Effectively seals wet, dripping holes and in most cases eliminates deterioration of the hole and surrounding strata
- Unaffected by sea or fresh water, mild acids or mild alkaline solutions
- Immediately fixes rock bolts / anchors
- Protects bolts from corrosion, can be used in wet/underwater condition
| CAPSULE SPEED | CAPSULE CODE | RATIO | SPIN TIME* |
|---|---|---|---|
| FAST/ SLOW | FS | 50:50 | 12-15 s |
Typical insertion properties at 25°C
* Approximate spin time in seconds
Product Options
- Lokset Spin to Stall - SKU NF0000460, 1,000mm L x 25mm D, 4 month shelf life
- Lokset Spin to Stall - SKU NF0000461, 1,200mm L x 25mm D, 4 month shelf life
- Lokset Spin to Stall - SKU NF0000462, 1,400mm L x 25mm D, 4 month shelf life
